Diffusive gradients in thin films using molecularly imprinted polymer binding gels for in situ measurements of antibiotics in urban wastewaters

• Selective molecularly imprinted polymer (MIP) binding gel was prepared. • MIP-DGT showed excellent uptake performance for antibiotics. • In situ measurement of antibiotics in wastewaters via MIP-DGT was developed. • The MIP-DGT method was robust, reliable, and highly sensitive. Urban wastewater is one of main sources for the introduction of antibiotics into the environment. Monitoring the concentrations of antibiotics in wastewater is necessary for estimating the amount of antibiotics discharged into the environment through urban wastewater treatment systems. In this study, we report a novel diffusive gradient in thin films (DGT) method based on molecularly imprinted polymers (MIPs) for in situ measurement of two typical antibiotics, fluoroquinolones (FQs) and sulfonamides (SAs) in urban wastewater. MIPs show specific adsorption toward their templates and their structural analogs, resulting in the selective uptake of the two target antibiotics during MIP-DGT deployment. The uptake performance of the MIP-DGTs was evaluated in the laboratory and was relatively independent of solution pH (4.0–9.0), ionic strength (1–750 mmol/L), and dissolved organic matter (DOM, 0–20 mg/L). MIP-DGT samplers were tested in the effluent of an urban wastewater treatment plant for field trials, where three SA (sulfamethoxazole, sulfapyridine, and trimethoprim) and one FQ (ofloxacin) antibiotics were detected, with concentrations ranging from 25.50 to 117.58 ng/L, which are consistent with the results measured by grab sampling. The total removal efficiency of the antibiotics was 80.1% by the treatment plant. This study demonstrates that MIP-DGT is an effective tool for in situ monitoring of trace antibiotics in complex urban wastewaters.     

N2 fixation in urbanization area rivers: spatial-temporal variations and influencing factors

Environmental Science and Pollution Research - While nitrogen (N2) fixation is an important process in nitrogen (N) biogeochemical cycling, supplying a significant portion of the N in natural...     

The relationship between lead and cadmium levels and functional dependence among elderly participants

The adverse impacts of lead and cadmium exposure on health outcomes have been reported in the past. Few studies have been conducted on the relationship between lead and cadmium exposures and disability. We evaluated whether lead and cadmium exposures were associated with functional dependence including the total number of disabilities, activities of daily living (ADL), instrumental activities of daily living (IADL), leisure and social activities (LSA), lower extremity mobility (LEM), and general physical activities (GPA) in an elderly population. A total of 5513 eligible subjects were enrolled in the study from the National Health and Nutrition Examination Survey 2001–2006. Serum lead and cadmium exposure assessments were performed using atomic absorption spectrometry. Functional dependence was assessed by 19 structured questions. The relationships between lead and cadmium exposures and functional dependence were investigated using by multivariable linear regression models. Q2, Q3, and Q4 of lead exposure were significantly associated with the total number of disabilities, with β coefficients of ??0.62 (95% CI ??0.99, ??0.24), ??0.64 (95% CI ??1.02, ??0.26), and ??0.81 (95% CI ??1.19, ??0.42), respectively. This relationship remained significant in males. Furthermore, we analyzed the relationships between lead and cadmium exposure quartiles and various functional dependence metrics, and we determined that lead content was significantly associated with decreased ADL, LEM, and GPA (p?<?0.05) and cadmium content was inversely associated with ADL (p?<?0.05). Our study demonstrated a strong relationship between exposure to lead and cadmium and functional dependence in an elderly population.

     

NOx attenuation in flue gas by •OH/SO4•--based advanced oxidation processes

Environmental Science and Pollution Research - The combustion of fossil fuels has resulted in rapidly increasing emissions of nitrogen oxide (NOx), which has caused serious human health and...     

侧向风速作用下聚氨酯泡沫双火源火蔓延研究

为探究环境风作用下逆向双点火源聚氨酯泡沫火蔓延及融合行为，开展多组对照实验并从材料传热机理角度分析侧向风速对火蔓延行为中火羽流形态、质量损失和辐射热流场等特征参数的影响。结果表明:风速与上述参数之间存在非线性关系。环境风效应使火焰被拉长且敷贴于预热区表面，增大预热区面积和热反馈；侧向风速的增加对FPU板材质量损失的影响逐渐弱化，且板材的熔滴率与风速呈正相关；无论侧向风是否存在，两侧逆向火焰融合后均达到整个蔓延过程中的峰值温度；风速的存在限制了火焰温度与辐射热通量峰值，也缩短了温度和辐射峰值出现的时间。     

热力耦合作用对桩及桩间土拱效应的影响研究*

为研究负温对桩侧应力及桩间土拱效应的影响，通过FLAC3D软件模拟热力耦合作用下新型排桩冻结法中桩间土拱效应的变化及温度效应下的桩间距，并根据巴霍尔金单排管冻结稳态温度场解析解，建立冻结壁平均温度区域解。研究结果表明:桩土接触面的应力分量τxy近似线性变化，应力分量σx近似均匀分布，温度降低对应力分量τxy的分布影响较小，但对应力分量σx的影响较大；负温使桩间距发生变化，且整体平均应力的分布也更加均匀化；通过与巴霍尔金解析解对比，证明单排管冻结温度场模型的可行性，在此基础上建立的单排管冻结壁平均温度区域解，其与数值模拟结果相差不超过1 ℃，计算误差满足工程要求；随着冻结时间的增加，单排管冻结壁温度场呈抛物线形式降低。     

基于循环经济,探索园区污水处理新思路

为响应国家节能减排和循环经济的理念,本文提出一种新的园区污水处理方式-以污治污:利用企业A废水中的碱性物质与消耗企业B废水中的氢离子,再向废水中投加石灰石去除多余的氢离子,投加液碱去除废水中的铜离子和锌离子。优化后的废水处理方式可减少盐酸、石灰石的使用量,从源头上减少了资源的浪费和排入外环境的污染物,对社会发展和生态环境均具有明显的正效益。     

土壤及地下水有机污染的化学与生物修复

现阶段,工业的生产任务越来越繁重,因此在其进行生产的时候,制造的污染物也会越来越多。在这个对于环保极度关注的时代,本文对于被污染的土壤还有地下水实施修复展开讨论。     

MCM-41分子筛负载铁铈催化降解甲基橙

采用等体积浸渍法制备了负载型有序介孔Fe-Ce/MCM-41催化剂。研究了该催化剂降解甲基橙的适宜工艺条件,并采用XPS,XRD,TEM技术对该催化剂进行了表征。实验结果表明,该催化剂Fenton氧化降解甲基橙的较适宜工艺条件为:溶液pH 5.0、甲基橙溶液初始质量浓度100 mg/L、催化剂加入量2.0 g/L、H_2O_2浓度20 mmol/L,在此适宜条件下反应120 min时,甲基橙去除率接近100%。表征结果显示:Fe-Ce/MCM-41催化剂主要由铁、铈、氧、碳4种元素组成;铁与铈的摩尔比接近3∶1;铁和铈主要以Fe_3O_4和CeO_2的形态存在于催化剂表面。     

高炉渣对Cd~(2+)的吸附性能

采用包头钢铁集团炼铁厂的高炉渣为吸附剂(粒径0.154 nm)对Cd2+进行吸附,运用SEM技术对吸附剂进行了表征,研究了初始Cd2+质量浓度、吸附剂加入量、吸附时间、吸附温度和废水pH对Cd2+去除率的影响,并探讨了吸附机理。表征结果显示:高炉渣吸附剂具有疏松多孔的特点,表面十分粗糙,比表面积较大。实验结果表明:当吸附温度为室温(28℃)、废水pH为7、初始Cd2+质量浓度为10 mg/L、吸附剂加入量为8 g/L、吸附时间为60 min时,Cd2+去除率达到98.55%;高炉渣对Cd2+的吸附符合拟二级动力学方程和Langmuir等温吸附模型,且吸附反应易发生。